Simple Pinocchio Glider
Introduction
Pinocchio is a simple and fun glider for kids to build and experiment with. It weight only 5.2 gr and takes approximately 20 minutes to build. It is designed for indoor and outdoor flight (but with minimal wind).
The glider was designed and fully manufactured in California USA. The glider is build from natural and biodegradable materials (Balsa wood, PLA and PVA glue).
The glider was designed and fully manufactured in California USA. The glider is build from natural and biodegradable materials (Balsa wood, PLA and PVA glue).
KIT content
The package includes two 1.5 mm thick Balsa plates with all precut parts. In addition, a 3D-printed nose-balance-weight and assembly instructions are provided.
The package doesn't include glue and craft knife.
Assembly Instructions (larger format)
Use either PVA, Balsa Cement or Thin CA glue. Look for the unique glue symbol in the instructions below, that indicated when and where to apply the selected glue.
Assembly Instructions (compact form)
Use either PVA, Balsa Cement or Thin CA glue. Look for the unique glue symbol in the instructions below, that indicated when and where to apply the selected glue.
Balancing
Balancing the glider is important to achieve smooth and long flight. Used the supplied balancing jig and instructions below to balance your glider. Add or remove small amount of weight from the nose of the glider to maximize flight distance and stability.
Test flight
Best results are achieved when launching the glider indoors. Outdoor flights are also possible but we recommend to wait for minimal or none wind conditions.
Several launch trails are usually needed to find the right launching strength and angle. To maximize flight distance and stability, the balancing of the glider can be further improved by adding or removing small amount of weight from the nose of the glider.
ENJOY AND FLY SAFELY!
